Installation: Time Consuming + Difficult
Getting the InvisibleSkinz film on the LG enV Touch isn’t a few minute job. It actually took us about 45 minutes to get everything installed properly. It comes with a few pieces of film, which was a bit of a puzzle to figure out which went where. (15 included pieces) Installing it requires using a “SHIELDspray” liquid solution, to be applied to both your hands and the film. One thing that may worry many is actually getting this liquid all over your device. I can assure, after installing this type of product on many devices, that using a proper amount of solution won’t cause any issues. Just be sure to avoid getting any solutions into any critical openings. If the device is off and allowed to dry for a couple hours after installation, there’s nothing to worry about. Applying the film was pretty difficult, you only have a short window of time to get it adjust to the right spot. If there are any bubbles caught between the film and the body of the phone, just squeeze them out with the included tool. There’s also a ton of smears and small particles making the entire thing look horrible after you finish. However if you wait patiently overnight or a day, most of those work themselves out.

Protection: Excellent
The InvisibleSkinz for the LG enV Touch offers an extraordinary amount of coverage. There are pieces for both displays, the sides of the phone, and the back. There’s not too much that’s left exposed to be concerned about. The material is about .2mm thick, making it durable enough to protect against even deep scratches. The material won’t start peeling off as you probably would see with other over the counter protective films.

Usability & Compatibility: Perfect
There was no aspect of my device that lost functionality after applying the screen protector and rear protective film. The headphone jack and charger port are completely left open for easy access. The touch screen display lost a small amount of sensitivity, however it’s well worth the trade off than having a nasty scratch. It should fit into any cases you may own as well.

Feel & Look: Excellent
It’s truly difficult to tell whether there’s anything even applied to the device with a quick glance. And that’s a good thing! It keeps all the original elements of the design of the LG enV Touch. Only after inspecting it for a second or two would you realize that there’s actually something protecting the device. There’s no noticeable bulk or weight that would be an issue. The phone feels just as it did without it.

Warranty & Replacement Policy: Excellent
InvisibleSkinz is actually an authorized retailer of ZAGG’s invisibleSHIELD. The item in this review would be the same item if purchased directly from ZAGG. Therefore the same warranty that ZAGG provides still applies. If you dissatisfied you can return it for a full refund in the first 30 days. If it gets scratched, torn, or damaged it has a life time warranty. All you have to do is mail it back to ZAGG in an envelope. They will send out a replacement at no cost. You can read Skatter Tech’s review of the ZAGG invisibleSHIELD for the iPhone 3GS for more info on our successful attempt to use the warranty.

Conclusion:
The InvisibleSkinz protective film for the LG enV Touch by ZAGG deserves a worthy mention. It’s well worth the investment for what it will do for your device in the long run. Keep in mind although this defends against scratches, it isn’t truly a replacement for what a case can do. A case can protect against physical damage such as a drop, which the protective film can not do. The best solution would be both the film and a case to truly prevent damage. If you wish to buy the InvisibleSkinz for your LG enV Touch, it’s available for purchase online today. Readers of Skatter Tech are eligible for a special 15% discount. That brings the price down to just $21 from the original $25. To redeem the offer, just key in the coupon code ‘21849′  (without quotes) while proceeding through checkout.

Buy: InvisibleSkinz for LG enV Touch
Coupon Code: 21849

Installation: Difficult
If you thought getting the flim onto the device was simple, you’re wrong. Installing the invisibleSHIELD onto the iPhone 3GS will take at least 20-30 minutes of your time. Plus I should mention that it’s recommended to let the film settle and dry overnight once applied. This means the phone should be untouched and remain turned off. The invisibleSHIELD is actually a “wet installation”. First step would be to clean off any dirt or fingerprints on the iPhone. Second spraying your fingertips and a piece of the film with the included liquid solution. Then align and place the clear film onto the iPhone. It’s best to work quickly, but can be removed to be readjusted in the first few minutes. The final step would be to use the squeegee to push out any air bubbles caught in between the film and the iPhone’s body. This may not seem like much, but it definitely takes a while. The most interesting part is how horrible it looks immediately after application. There’s usually a ton of micro bubbles and smears. However if you let it settle for the mentioned duration, those work themselves out and turn out looking excellent. Of the included pieces, the film for the the display was the easiest to install. The rear was the most difficult since it has to deal with curvature of the iPhone. Despite that being said, installing one of these isn’t rocket science. If you have the patience and time, it’s well worth the effort.

Protection: Excellent
The ZAGG invisibleSHIELD for the iPhone 3GS (also compatible with the 3G) offers excellent coverage. The entire front portion of the iPhone is covered with only a slit to allow sound to travel through the ear piece. An optional piece is provided to cover the home button. The rear piece of film covers the entire back side leaving openings only for the camera, volume rocker and the silent switch. Other areas left un-covered would be the dock connector, speakers, power button, and headphone jack. The film even wraps around the corners to offer as much protection as possible. Small strips are also provided to cover the bezel on the top and bottom. Once installed and allowed to dry, there’s no way that this invisibleSHIELD will peel off on its own. If you were to attempt to remove it, a decent amount of force would be required. This assures us that the Shield will stay on and defend against nasty scratches.

Usability & Compatibility: Good
Just about every aspect of the iPhone 3GS is just as functional with the invisibleSHIELD applied as without anything. It is thin enough to fit into some iPhone/iPod docks and works with most accessories. Most cases fit on just fine. I did encounter some difficulties getting some exact-fit hard cases on. For instance, the protector added just enough thickness that it didn’t allow the Proporta Crystal Case to snap together. But despite that one issue, the majority of things I attempted to use it with including the OtterBox Impact Case for the iPhone 3G, worked just perfectly.

Feel & Look: Excellent
When held or placed in a pocket, it’s hard to even tell if there’s even something on the device. For example, an observer or onlooker would actually have to inspect the device for a few seconds to realize that there’s actually a thin layer over the body of the iPhone 3GS. The only small quirk I had was the slight texture created by the film. Despite that, it goes almost unnoticed when the display is in use. The ZAGG invisible shield also feels fairly good on the finger. Since the iPhone is a touch screen device, that is a fairly important factor. In the beginning it was a bit “sticky,” but after a little bit of use, it became almost as smooth as the display itself. Almost all sensitivity is retained, so there’s not much to worry about there. Even if a slight amount is lost, it’s a well worth trade off in exchange for protecting your display from the dangers of keys, coins, pens or whatever else might be in your purse or pocket.

Warranty & Replacement Policy: Excellent
Zagg offers one of the best warranty and replacement policies I’ve come across. If for any reason you aren’t satisfied in the first 30 days, you can get all your money back. If you have been using the invisibleSHIELD and it gets scratched, torn, or damaged, they will offer a free replacement. The only catch would be that Zagg requests that you mail then back the damaged screen protector. They inspect them for possible defects to help improve their product. With that being said, I decided to actually tested the warranty service. I purchased another Zagg invisibleSHIELD for another gadget. (Not the one shown in this review which was provided by Zagg.) It actually ended up being a bit defective since a part of it was already scratched right when it came out of the packaging. I called a few day after I installed it too see what they would have to offer. They immediately offered to send out a replacement at no cost. I just had to mail them back the old pieces within 25 days. They suggested I stick to a blank sheet of paper, fold it up, and send it off in standard letter envelope. And that was it!

Conclusion:
I have personally been a huge fan of screen protectors. Zagg’s invisibleSHIELD takes things to the next step by also offering coverage for not just the display, but also the rest of the device. The shield keeps the iPhone 3GS compact, looking stylish, and defends against even the deepest of scratches. Keep in mind, this will help prevent wear and tear, but isn’t a complete alternative for cases. One drop with or without a Zagg invisibleSHIELD will probably yield the same result: a dead iPhone. A simple $20 accessory such as the Proporta Crystal Case, OtterBox Impact Case, or Griffin Wave will go a long way to protect physical damage. Of course, if you have the cash to spend, the best solution would be a combination of both. If you want to grab an indivisibleSHIELD for your iPhone 3G or 3GS, it’s available for $25 for the full protection kit seen in this review. If you wish you can purchase either just the rear or front protection separately for $19 or $15 respectively. Zagg also has a large selection of invisible shields for many other devices including phones, media players, cameras, laptops, and lot more.

Link: Zagg invisibleSHIELD iPhone 3GS
Discount Code: 2pdjw9f (15% Discount on Entire Purchase)
Buy: Full Protection for iPhone 3GS – $18